How to use the car steering wheel lock

Steps and methods

1. When using the steering wheel lock for the first time, adjust the locking fork according to the steps. Use the hex wrench provided with the lock to loosen the hex screw on the locking fork, allowing it to rotate freely.

2. Place the opened lock above the steering wheel, then rotate the locking fork so that the distance between the two locking forks is less than the inner diameter of the steering wheel. If appropriate, use an Allen wrench to screw the screws of the locking fork into the V-shaped positioning groove on the locking beam screw, making it non adjustable.

3. When locking the car, face the side with the logo towards you, hold the lock body with your right hand that holds the key, and gently open the lock fork with your left hand.

4. Support the locking fork on the left side of the steering wheel, pull the lock body with your right hand and hook it onto the right side of the steering wheel, then gently lift the handle. When you hear a "click" sound, it means it is locked.

Matters needing attention

After locking, try to see if the lock is secure.